南京沛格冷冻修边机销往欧洲国家-希腊
发布日期:2022-05-06
点击次数:442
Frozen Shot Cryogenic Deflashing Machine from Nanjing Pege Shipped to Greece
to Support Customer for the Silcone Rubber Parts Deflashing Process
Cryogenic Deflashing is a efficient and precise deflashing process for the rubber components, especially the smaller rubber components.
Cryogenic deburring using the nitrogen to freeze the small and thin flashes of parts first, the thin flashes will get embrittled in a extremly low temp enviroment(generally, around -70C),
then a PC made small particle as the blasting media to blast out the excess flashes in a quick and efficient way.
Not only the normal rubber material made components, but also the silicone rubber compoents. When the flash condition is complying with our technology standard( flash thickness less than 0.1mm), then cryogen deflashing will get a wonderful and satisfied deflashing result.
For this customer from Greece, their compoents are silicone material, most are round tube or samll rubber rings, the flashes conditions are good.
After our comprehensive testing, the deflashing result are approved by the customer.
Cryogenic shotblasting deflashing process will surely greatly improve the deflashing efficiency and deflashing precision of those components manufactured in their factory.
Following are the photos of the nitrogen shotblating machine Model PG-80T.
.png)
to Support Customer for the Silcone Rubber Parts Deflashing Process
Cryogenic Deflashing is a efficient and precise deflashing process for the rubber components, especially the smaller rubber components.
Cryogenic deburring using the nitrogen to freeze the small and thin flashes of parts first, the thin flashes will get embrittled in a extremly low temp enviroment(generally, around -70C),
then a PC made small particle as the blasting media to blast out the excess flashes in a quick and efficient way.
Not only the normal rubber material made components, but also the silicone rubber compoents. When the flash condition is complying with our technology standard( flash thickness less than 0.1mm), then cryogen deflashing will get a wonderful and satisfied deflashing result.
For this customer from Greece, their compoents are silicone material, most are round tube or samll rubber rings, the flashes conditions are good.
After our comprehensive testing, the deflashing result are approved by the customer.
Cryogenic shotblasting deflashing process will surely greatly improve the deflashing efficiency and deflashing precision of those components manufactured in their factory.
Following are the photos of the nitrogen shotblating machine Model PG-80T.
在线交谈
在线交谈