欢迎光临南京沛格机械科技有限公司官方网站
+86-13260713283
当前位置:网站首页 >> 产品中心 >> 硅橡胶切条机

产品中心

产品中心

联系我们

南京沛格机械科技有限公司
联系人:潘先生
电话:+8613260713283
邮件:pan_daniel@outlook.com
地址:南京浦口区浦口大道1号新城总部大厦4楼

硅橡胶切条机

硅橡胶切条机

硅橡胶切条与分条机

Silicone Rubber Sheet Cutting Machine 

Model:                 PG-SC-600
Size:                   1040*680*1000mm
Power supply:     0.87Kw 220V 50-60hz
Cutting Length:   0.1mm-1000mm,
Cutting width:      ≤ 550mm,
Sheet thickness:  ≤12mm
Cutting weight:   0.1g-1000g
Cutting speed:     ≤90/min
Cutting Model:     By weight or By Length
Operation Mode: Touch Screen
Control Mode:     PLC Nurmerical Controlled

    硅胶切条机

    A. Machine Photos


    B.Product Specifications:

    Silicone Rubber Sheet Cutting Machine
    Model  PG-SC-600
    Size  1040*680*1000mm
    Power supply 0.87Kw 220V 50-60hz
    Cutting Length 0.1mm-1000mm,
    Cutting width ≤ 550mm,
    Sheet thickness ≤12mm
    Cutting weight 0.1g-1000g
    Cutting speed ≤90/min
    Model By weight or By Length
    Operation Mode Touch Screen
    Control Mode PLC Nurmerical Controlled

    C.Product Features

    1. One machine has multiple usage, it can both cut and slit and has the feature of high accuracy and therefore can save the raw material, save cost and also improve the production efficiency2. Planetary Deceleration electromagnet brake motor cutting, has the feature of long life, low noise and strong power
    3. 220V voltage closed loop stepping motor with high feeding speed and high accuracy can not only save the manual weighing process, but also reduce the reject ratio and improve production efficiency as well
    4. Cutting guide use the well-know brand linear guide rail, has the feature of low noise, high accuracy and good quality.
    5. Machine has high level safety feature, in the front of the blade rack, there is a safety fender and also has a safety electronic eye, when you take off the safety plate, all actions will be stopped automatically and a warning notice will show on the operation panel screen.
    6. When cutting the rubber sheet, either stop the machine by quantity control or manual control
    7. Has three section setting of length and speed, can use single mode or use combined mode, can cut different specification material at the same time, it will be more general use.
    8. The machine is equipped with a patent protection program, when the user wrongly adjusts the blade or a breakdown happen, there will be warning notice on the operation panel screen.
    9. Has two cutting modes, fast cutting or standard cutting, then it will be more efficient and more stable
    10. Has two control methods, it can cut the rubber sheet by choosing length or precise weight, the operation is more convenient and intelligent.


    请提交您的基本信息,我们将会尽快与您联系!

    *

    *

    *

    *

    *

相关产品